The system comprises three major components: an electrolyzer, a compressor, and a storage tank, all seamlessly integrated with IoT-programmed software for efficient monitoring and control. With SCADA system integration, it enables real-time data analysis and automation. Additionally, the system can be powered by any renewable energy source to produce green hydrogen, ensuring a sustainable and eco-friendly energy solution.
IDEC Unit use the advantages of cooling using water evaporation without increasing humidity in the supply air. Special high efficiency ThermoFlux Cool Module achieves the indirect evaporative cooling. Cooling Coil or Direct evaporative cooling module can be added on the second stage. Indirect + Direct evaporative coolers reduce dry bulb temperature even further when compares to direct evaporating cooling. ThermoFlux IDEC units enable the use these units in all climate zone and for various application. INDIRECT DIRECT (TWO STAGE) EVAPORATIVE COOLING UNITS- IDEC systems are potential replacement to conventional Evaporative cooling / Air washer systems with up to 40% energy saving and up to 30% water saving possibility. They are suitable for comfort cooling applications across industrial and commercial buildings and selected process cooling applications as well. These solutions are suitable for applications like cooling of large working spaces in process as well as manufacturing industries, warehouse, control panels room cooling, ventilation of high heat areas etc.
At IES, we believe Digital Twins are the key to decarbonising the built environment. Fully scalable from a single building to an entire city, our ICL technology goes beyond BIM to create a live Digital Twin which responds and behaves like its real world counterpart. Delivering the data-driven information needed to uncover significant energy, carbon, capital and operational savings. While taking account of resource use, transport, social and economic factors.
InDirect Evaporative Coolers
Indirect Cooling
A single stage Indirect Evaporative Coolers use the advantages of cooling using water evaporation without increasing humidity in the supply air. This is done through our special DRI COOL module.
A 2-stage evaporative cooling system is an advanced cooling system that utilizes indirect evaporative cooling modules followed by a direct cooling section. The overall result is lower dry bulb temperature as compared to a direct only evaporative coolers.
A third stage can be added as a cooling coil which is turned on when the second direct evaporative cooling section is off. This is based on the ambient conditions.
These units are also offered in very large air volumes and with all sensors, controls and electrical packaged on board the unit.
Indirect/Direct Evaporative cooling unit also known as Two-stage Air Washer Unit, uses both indirect and direct cooling techniques to cool the air.
In Two Stage Evaporative Cooling system, the first stage is Indirect Evaporative cooling. In Indirect Evaporative cooling stage(IEC) the water and hot air travel in different channels. Water and hot air do not come in direct contact with each other. This is why it is called Indirect Evaporative cooling. Because no moisture is added, the air reaches a lower dry bulb and wet bulb temperature than the outside air when leaving the heat exchanger.
The second stage, that is the adiabatic evaporative cooling, cellulose cooling pad is used which cools the air further through the wet evaporative media. As a result of this two-step cooling process, the air can be brought down to a much lower temperature and is therefore not capable of containing high amounts of humidity.
The ASPT 11i series is an OEM Pressure Transmitter which best fit for Hydraulic as well as Penumatic Applications available from ranges from 1 Bar onwards upto 1000 Bar. We also have compound and absolute pressure transmitters for specific ranges.
Get in touch with us if you are facing quality and delivery issues from international suppliers, we at ACT have a vision to provide pressure measurement solutions locally which is reliable as well as techno-commerically affordable
ACT Sensors. Your Engineering Partner...
Request
Callback
With world-class efficiency and a broad selection of flow sizes and working pressures, the CR range of multi-stage centrifugal pumps are the perfect high pressure pumps for customers seeking to make savings in their operating budget. The thoroughly-optimised design ensures world-class energy efficiency and saves money.
