Available in size up to 1000mm (40”). * (Sizes above 1000 mm available on request).
Precise Double Regulation and Flow Measurement within 2.5D or less.
Valve Rating PN16 and PN20. *(Pressure PN25 or above available on request).
Positive Shutoff High-Performance Butterfly Valve.
EPDM Seal.
Stainless Steel construction for critical components.
Zero Backlash Gear Box with 1 degree accuracy of setting.
Tamper Proof Locking.

The electronic mixing valve is used in centralised systems that produce and distribute domestic hot water. Its function is to guarantee and maintain the temperature of the domestic hot water delivered to the user when there are variations in the temperature and pressure of the hot and cold water at the inlet or in the draw-off flow rate.
This particular series of electronic mixing valves is equipped with a specific regulator that controls a set of programs for circuit thermal disinfection against Legionella. It also allows checking that the thermal disinfection temperature and time are actually reached and means the appropriate corrective action can be taken. All the parameters are updated every day and logged, with temperatures recorded every hour.
Depending on the type of system and habits of the user, it is possible to program temperature levels and operation times in the most appropriate manner.

We are suppliers to all major OEM for Elco lift fans and blowers

The Wireless lighting Management solution is built utilizing several components that communicate among them on a Zigbee wireless network using ISM band 2.4GHz. Wireless network formed by these components operate in a personal area network with its own network ID and MAC address. The communication inside the network is encrypted. The WLMS provides digital light dimming capability using DALI interface as well as Analog dimming capability using 0-10V analog dimming output to lamp drivers

AVAILABLE I AL CONSTRUCTION WITH OR WITHOUT POWDER COATING

Bry-Air Low Dew Point (LDP) Dehumidifiers are the ideal solution for battery cell manufacturing. They are the perfect solution for moisture menace in your high demand Dry Rooms, critical for lithium battery manufacturing. These high energy saving, customized environmental control equipment – Low Dew Point Dehumidifiers (LDP) along with Dry Rooms can control moisture levels from-40°C to -80°C dew point depending on the hygroscopic material processing being carried out. Tailored exclusively for Lithium Battery manufacturing and embedded with Patented Technology, the LDP from Bry-Air is the most energy efficient dehumidifier for <1% RH dry rooms. The Super LDP & Green DryPurge (GDP) dehumidifiers are specially designed and engineered to control moisture levels and have the shortest manufacturing lead time vis-a-vis any competitor product available in the world. The equipment is manufactured under the modular approach leading to ease in transportation, faster dispatch and better inventory management. Assembling on site is far simpler due to the extensive years of R&D put behind making some of the best low dew point desiccant dehumidifiers installed and functioning smoothly across the globe. Ours is the largest dedicated manufacturing facility in the world for special lithium-ion cell manufacturing dehumidifiers. We have an actual working dry room at one of our facilities in Gurugram, India and dedicated lab for testing low dew point desiccant unit configurations. We are modest and well equipped in our efforts to support our country and the world with the best air handling units for giga factories mushrooming across the globe for making the environment green and healthier, be it electric vehicles or energy storage systems compensating for the depleting natural resources. Our processes, plants and people are ready to for any multi fold growth which the battery cell manufacturing industry is yet to witness.

Designs available as per API 609, EN: BS 593, IS 13095.
Valve Rating of PN10 (150psi).
Bi-Directional Flow with Bubble-Tight Shut-Off.
Operating temperatures range between -20 ° C to 120 ° C.
Wafer body design from 50mm (12”) up to 300mm (12”). Lugged models are available on request.

Exchangers made entirely of stainless materials, intended for systems with high sanitary standards.

LUNA TM brazed plate heat exchangers are a materially homogenous design with high hygienic level and high resistance to temperature changes and corrosion.

Thanks to being made entirely of stainless materials, they can be used in heating or refrigerating systems with high sanitary requirements. They are also a perfect solution in case of aggressive media, e.g. aggressive water from water supply system, ammonia, as well as in systems with galvanized pipes.

APPLICATION
WHEN HIGH LEVEL OF HYGIENE IS CRUCIAL
• systems with demineralized water
• cooling systems with high hygienic standards
• tap water heating systems
WHEN RELIABILITY IS ESSENTIAL
• central heating systems
• systems with aggressive media
• systems with galvanized pipes
• industrial cooling systems
• hydraulic oil cooling

WORKING PARAMETERS PED
- maximum temperature: 200 °C
- minimum temperature: 195°C
- maximum pressure: 20 bar

Manufacturing Machines.

The Grundfos MAGNA circulator pumps are designed for heating and cooling applications in commercial buildings. The pumps are available in both cast-iron and stainless-steel and as twin-head variants. The pumps are maintenance-free due to the canned-rotor type design.
The MAGNA3 is the premium choice when system control and monitoring is key. MAGNA3 supports fieldbus by optional CIM modules, and connects directly with the Grundfos GO app via Bluetooth.

Available Sizes 8ft to 24ft Diameter
Suitable for
Industries,Commercial places,Educational Institutions,Marriage Halls,Auditoriums ,Religion Places etc